Light on but tablet not able to connect to Pi

Light on but tablet not able to connect to Pi

Step-1
Restart the Pi and tablets and then try again

Step-2
Check if the Pi code int tablet and Pi is same

Step-3
Go to Settings and click on WLAN
Click on the options button present in top right corner and click on Saved Networks
Remove all the saved networks starting with Pi_AP_
Navigate back to app and try connecting.
If app is unable to automatically connect, then connect manually by entering password as ‘Raspberry’ 

Note- This situation generally arises when someone shut down the Pi navigating through TV screen in this scenario Pi stops processing (gets Switched off) but its light still glows because it is connected to a power source.

    • Related Articles

    • Light blinking green in Pi

      Step-1Wait for Sometime to see if Red light comes up Step-2 Try connecting Pi with laptop or other power source. Step-3 Try putting the card in different Pi and see if that Pi is working fine. Step-4 Try putting a New card from CG 

    • Light not coming on in Pi

      If Light is not coming in Pi, please follow the steps described below:- Step-1 Please Check the Connecting USB cable and Port to which Pi is connected is working properly. Step-2 Try connecting Pi with laptop or other power source. If Still problem ...

    • Light is red on Pi but T.V not displaying content

      Step-1 Check the HDMI cable connecting to Pi & TV is working fine. Step-2 Try putting another Card by CG into the PI. Note- This situation generally arises when someone shut down the Pi navigating through TV screen in this scenario Pi stops ...

    • Does not show the Pi_AP Network when we connect to the Pi. What does that mean?

      Step-1 Check if any tablet is showing the network. Step-2 Restart the Pi. Step-3 Restart the Tablets. If problem still persists, Change the SD card of Pi and try again if still problem didn't get resolved Change the Pi.

    • Pi taking a long time to connect to the tablets.

      Restart the Pi and check if Pi has enough free space i.e 5 GB.  Steps to check free space in Pi Step-1- Remove SD card from Pi. Step-2- Insert the SD card into SD Card reader. Step-3- Connect it with Computer/Laptop. Step-4- When computer/Laptop ...